Best Starfield Settings For Maximum Performance On PC



If you thought your PC could run Starfield at maximum settings, 1440p at over 60-80 frames per second, think again! Starfield is one of those games that rely heavily on your GPU. Hence, you need to tweak some settings in order to get a decent boost in performance at a minimal graphical quality loss. So, I’ve gathered a mix of community advice and personal testing to bring you my best Starfield Settings guide to help you get started with improving the game’s FPS.

Key Takeaways

  • Starfield is a tough game to run on even high-end PCs. The game also does not have the best optimization in the market, making it even harder to run on mid-range hardware.
  • You can fine-tune the best Starfield settings in the Display menu to get the most performance out of your PC in Starfield. 

  • First, you have to make sure that your PC can handle Starfield or not. You’ll need to do this by comparing your PC specs to Starfield’s requirements. Your PC should meet or exceed at least the minimum requirements of the game:
    • Operating System: Windows 10 version 21H1 (10.0.19043)
    • CPU: AMD Ryzen 5 2600X, Intel Core i7-6800K
    • System RAM: 16 GB RAM
    • Graphics Card: AMD Radeon RX 5700, NVIDIA GeForce 1070 Ti
    • DirectX Version: 12
    • Network Type: Broadband Internet connection
    • Storage Space Requirement: 125 GB of available space
    • Further Notes: SSD Required

  • Use the following best Starfield settings to get the maximum performance on your PC:
    • Borderless Full Screen: ON
    • Window Size: Auto Selected
    • Dynamic Resolution: ON
    • Render Resolution Scale: 75%
    • Graphics Preset: Custom
    • Shadow Quality: Medium
    • Indirect Lighting: High
    • Reflections: Medium
    • Particle Quality: High
    • Volumetric Lighting: Low
    • Crowd Density: High
    • Motion Blur: OFF
    • GTAO Quality: High
    • Grass Quality: Ultra
    • Contact Shadows: Low
    • VSYNC: ON
    • Upscaling: FSR2
    • Sharpening: Your Preference
    • Enable VRS: ON
    • Film Grain Intensity: OFF
    • Enable Depth Of Field: ON

System Requirements For Starfield

Starfield AMD System Requirements
Starfield System Requirements AMD Hardware (Image Credits: AMD X Bethesda)

Now, before you apply our optimization guide on Starfield later to find out it didn’t make a difference, let’s first find out if your PC can even run the game. Starfield doesn’t have the craziest system requirements. However, you’ll still need a decent enough GPU for the game to run smoothly, even in its current unoptimized condition. Check out the official Starfield system requirements below:

Minimum System Requirements For Starfield

  • Operating System: Windows 10 version 21H1 (10.0.19043)
  • CPU: AMD Ryzen 5 2600X, Intel Core i7-6800K
  • System RAM: 16 GB RAM
  • Graphics Card: AMD Radeon RX 5700, NVIDIA GeForce 1070 Ti
  • DirectX Version: 12
  • Network Type: Broadband Internet connection
  • Storage Space Requirement: 125 GB of available space
  • Further Notes: SSD Required

Performance Expectation: You can expect your PC to run the game at Low-Medium settings on 1080P resolution with FSR activated, netting you 40-50 FPS.

Recommended System Requirements For Starfield

  • Operating System: Windows 10/11 with updates
  • CPU: AMD Ryzen 5 3600X, Intel i5-10600K
  • System RAM: 16 GB RAM
  • Graphics Card: AMD Radeon RX 6800 XT, NVIDIA GeForce RTX 2080
  • DirectX Version: 12
  • Network Type: Broadband Internet connection
  • Storage Space Requirement: 125 GB of available space
  • Further Notes: SSD Required

Performance Expectation: You can expect your PC to run the game at Medium-High settings on 1440p resolution with FSR activated, netting you 50-60 FPS.

If you’re done comparing your PC specifications with the Starfield requirements and find out that yours matches or exceeds at least the minimum requirements, then you’re good. However, if your PC falls short of even the minimum system requirements for Starfield, then I’m afraid you’re due for an upgrade if you want to enjoy the game.

Starfield Best Display Settings

We’ll be taking you through each of the best Starfield Settings in its display menu and show you what impact each setting preset will have on the game’s performance on your PC. 

Display Settings For Starfield
The Display Settings in Starfield (Image by eXputer)

Borderless Full Screen: ON

Starfield does not have an exclusive full-screen mode, which offers significantly better performance. So, you’ll have to make do with Borderless Full Screen mode to get a near-exclusive full-screen mode experience. The alt-tabbing out of the game might be easy, but I’ve personally experienced steering in-game. I recommend turning off Full Screen Optimization in the game’s properties features to reduce the stuttering. 

Window Size: Auto Selected

If you’re playing the game on Borderless Fullscreen mode, then the resolution will be auto-selected to your monitor’s native resolution. If you want to change the resolution, you’ll have to turn Borderless Fullscreen mode off, which will change Starfield to Windowed Mode. 

Note: The resolution will dynamically change according to the upscaler that you select.

Dynamic Resolution: ON

If you ask me personally, I turned Dynamic Resolution off. I have a decent GPU to run the game without resorting to letting the game reduce my resolution mid-gameplay. This made textures and environmental objects really blurry for me. However, If you want the absolute best performance boost, then I recommend that you turn Dynamic Resolution on and apply some level of Sharpening from either in-game settings or your Nvidia or AMD driver applications.

Render Resolution Scale: 75%

By default, the game has Render Resolution set to 75%, which is what you should set to as well. The reason why I’m not recommending a 100% resolution scale is that we’ll be using FSR2 as an upscaler. It works great with 75% when it comes to improving resolution quality. 

Graphics Preset: Custom

We’ll be fine-tuning everything here in order to have the best Starfield settings. So, we don’t need to use a pre-determined graphical preset. Hence, Custom is the way to go. 

Shadow Quality: Medium

Shadow quality makes a huge impact on the game’s visuals. If you move from ultra preset to low, the draw distance for shadows decreases substantially. Low is definitely not worth it as it has only an 8% performance improvement over medium. However, setting the Shadow Quality to medium from ultra will net you a 25-30% performance improvement. 

Indirect Lighting: High

As of writing, the Indirect Lighting feature in Starfield has not had such a performance impact on the game. Maybe it’s not working as intended and will be fixed in a later patch. So, for now, I’ve set it to High. If it gets fixed in a future patch and decreases your performance, you can lower it according to your requirements. 

Reflections: Medium

The reflections will be in effect on shiny surfaces like water bodies or glass on buildings. Switching from High to Medium will net you a nice 3% boost in performance with a minor graphical quality loss. However, switching to low nets, you only get a 1% additional boost with quite bad reflections. 

Particle Quality: High

Particle quality is also like indirect lighting setting. It has little to no impact on your performance as of now. So, high is a suitable option for it. If you’re really fishing for FPS, you can switch it to medium for a minor 2% performance improvement. 

Volumetric Lighting: Low

Volumetric Lighting controls the quality and the resolution of the volumetric effects like light shining through fog, sun rays through a window, etc., In Starfield. There’s a minor difference between low and high in average gameplay, but you’ll get a nice 5% performance boost with it. 

Crowd Density: High

The world of Starfield looks the most lived-in when you’ve set the Crowd Density to high. It doesn’t have much performance impact as you’ll only get a 2-3% gain by reducing it to low, which isn’t worth it.

Motion Blur: OFF

The Motion Blur setting in Starfield combines both object and camera motion blur into one setting. So, if you’re already falling short of FPS, it’ll only make your game look laggy. So I’ve personally switched it off as it looks really bad on my PC. It also gives you a 2% boost in performance, so I guess it’s a win-win. 

GTAO Quality: High

GTAO quality controls the Ambient Occlusion in Starfield. This means that if you want an in-depth world with proper shadowing between objects and not flat-looking surfaces, you should set GTAO to high. High and Ultra are almost indistinguishable. 

Grass Quality: Ultra

Alright, our first setting that we chose to select Ultra for. Ok, hear me out! Grass Quality affects the draw distance for grass in your environment, especially the forested areas outside the cities. Now, the lower the quality you set, the lesser the draw distances will be, but there’s no performance impact, either positive or negative, by either Low or Ultra, at least not on the GPU side of things. Hence, Ultra is the best option for Grass Quality. 

Contact Shadows: Low

Contact Shadows is a very subtle graphical effect that adds depth to objects in-game. Now, from Low to Ultra, none of the presets have any difference between them, at least at the time of writing. So, you should go for Low, as it also gives you a nice 3% performance boost. 


In most games, I always instruct my readers to turn on Vsync as the input latency increase you get out of this is simply the worst. Plus, the game also feels laggy and suttery. However, Starfield started crashing for several players, and a common solution that people found was turning on Vsync. So, you should first try playing by turning off the Vsync, and if your game becomes unstable, then simply turn it On to avoid any hitches mid-game. 

Upscaling: FSR2

I’m genuinely a fan of AMD FSR 2.0 upscaling technology here. AMD is even the official PC partner for Starfield. Still, Bethesda somehow goofed up the FSR2 implementation in Starfield. For many players, the FSR2 upscaler makes the objects shimmer more and introduces aliasing instead of doing the opposite and making the image better with AI. However, since we want the absolute best performance in Starfield, FSR2 is the way to go. 

You can also use DLSS in Starfield by installing a third-party mod. Check out our guide to find out how!

Sharpening: Your Preference

Sharpening is an aesthetic filter to make the texture look more crisp and less blurry. You can start by putting the slider at 50% and then increasing or decreasing it from there according to your taste. I’d personally recommend setting it to more than 50%, as the game’s quite blurry if you aren’t playing it on high-end resolutions. 

Enable VRS: ON

Variable Rate Shading (VRS) in Starfield has no performance impact on your gameplay, and neither was I able to spot any visual differences in different scenes. It’s best to keep it on as turning it off drops your performance very slightly. 

Film Grain Intensity: OFF

Film Grain simply ruins the quality of the image, and I still stand by my words that this shouldn’t exist in games. But I guess everyone has their preference, but I highly recommend that you turn it off to enjoy clear visuals in Starfield.

Enable Depth Of Field: ON

Depth of Field is a nice Bokeh effect in gameplay, which you won’t mostly notice, but when you do, it looks good aesthetically. It doesn’t have any performance impact as well, so keeping is on is the best move here. 

How Much Performance Did You Gain?

We’ve listed all the best Starfield settings that you can use in your copy of the game to improve performance drastically. Starfield just got released, and it’ll need a few performance patches to get into its best shape. Until that happens, I hope the best settings guide is able to make your gameplay experience better. For everything else on Starfield, make sure to keep visiting eXputer.


How can I make Starfield run better on my computer?

You’ll need to upgrade your PC if you don’t have the right components listed in at least the minimum system requirements of Starfield. You can also apply our best settings listed in this guide to improve performance even more.

How many FPS on Starfield I can get?

Well, this depends on the combination of CPU and GPU that you have. If your setup falls anywhere between minimum and recommended requirements, you can expect 30 to 40 FPS in Starfield.

How much RAM does Starfield need?

You’ll need a minimum of 16GB of RAM to run Starfield on your PC.

Do you feel that you need an additional performance boost in Starfield? Check out our dedicated performance guides below: 

Here’s more on Starfield by eXputer:

Was this article helpful?

Thanks! Do share your feedback with us. ⚡

How could we improve this post? Please Help us. ✍

Please enter your comment!
Please enter your name here